escort timing belt

Removal, caution: Incorrect removal or installation of the timing belt can result in damage to internal engine components.
Inspect the belt for signs of oil contamination.
Remove the drive belt and the drive belt tensioner.
Again, make sure the notch and groove are aligned (they again will be up).Car Covers, convertible Tops, Soft Tops, Parts.Use the 19mm bolt from the harmonic balancer and turn the engine 2 complete turns and verify that the cam gear and crank gear are in their proper position and aligned with the dots and notches.Loosen the timing belt tensioner, (10mm) then use a 3/8" rachet in the belt tensioner to relieve the tension.Place a jack under the engine on the right side of the vehicle, then remove the engine mount dating sex tid from the top of the fender well, (17mm deep well socket and 17mm wrench required) it is not necessary to remove the mount from the side.Remove the timing cover, (10mm) it has 6 bolts and nuts.Keep the belt span from the crankshaft to the camshaft tight while installing the timing belt over the camshaft.Secure Checkout, we Accept, copyright 2019 AM Auto Parts.Note:There is no timing adjustment for this vehicle, and if you are not properly aligned on the cam gear and crank gear it will not run properly.Remove the bolt and the crankshaft pulley.Das interaktive Transkript konnte nicht geladen werden.Body Panels, bumpers Related - Front Rear.M, was this answer helpful?Note: Install the timing belt over the sprockets in a counterclockwise direction starting at the crankshaft.Wiedergabeliste, wiedergabeliste _count total wird geladen.
Diese Funktion ist gerade nicht verfügbar.



Hood Latch Catch Brackets, hood Release Cable, horns Horn Parts.
Decal Stripe Kits, door Handle - Exterior, door Hinge Parts.
Door Lock Switch, emblems Nameplates, engine Compartment Trim.

[L_RANDNUM-10-999]